Compare Prices

5th Gear Shift Shaft

5th Gear Shift Shaft - Machter 5th Gear Lock Nut Retainer fits Dodge Ram 2500 3500 HD Cummins 4WD 4x4 New Venture UPDATED NV4500
Machter 5th Gear Lock Nut Retainer fits Dodge Ram 2500 3500 HD Cummins 4WD 4x4 New Venture UPDATED

5th Gear Shift Shaft

The Fifth Gear lock nut retainer locks the nut to the spline on the main shaft. By doing this the retaining nut can't back off. We have been installing this on our rebuilt units and have not had any failures to date. We have also installed this on updated main shafts that have had repeated failures and this has fixed the problem. Some customers have complained of many failures until this retainer was installed. After installation of the lock nut retainer there have been no known failures.Suit:Dodge Ram trucks equipped with 5-spd NV4500 4wd Transmissions.ONLY fits 29-spline output shafts (DODGE 4wd models)Does not work with GM/Cheverolet NV4500 transmissionsSpecification:* CNC Machined from high-strength steel for perfect fitment and extreme strength.* Prevents the common issue of the nv4500 5th gear nut backing off of the shaft, causing failure.* Utilizes existing input shaft in transfer case to secure the retainer on the main shaft.* 4 Tooth design completely engages the lock nut, while 29-Spline body meshes with the main shaft for solid, secure installation.* No need to remove, or disassemble the transmission assembly. Only remove the transfer case and extension housing while still in the truck.* Works with original AND aftermarket lock nuts.* A perfect addition to all Ram 4wd ...

  • Brand: Machter
  • ASIN: B01EMFETK0
  • Part No: LNR-DODGE01
5th Gear Shift Shaft - NV5600 Manual Transmission 5th Gear, Counter Shaft, 45T
NV5600 Manual Transmission 5th Gear, Counter Shaft,

5th Gear Shift Shaft

NV5600 5th Gear, Counter Shaft, 45T

  • Brand: ProActive Gears
  • ASIN: B07BNRVBQD
  • Part No: 26164
5th Gear Shift Shaft - ACDelco 89048285 GM Original Equipment Manual Transmission 5th Gear Shift Shaft
ACDelco 89048285 GM Original Equipment Manual Transmission 5th Gear Shift

5th Gear Shift Shaft

ACDelco GM Original Equipment Manual Trans Shift Shaft is a GM-recommended replacement component for one or more of the following vehicle systems: automatic transmission/transaxle, and/or manual drivetrain and axles. This original equipment shaft will provide the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B00S0B8SCS
  • UPC: 808709042679
  • Part No: 89048285
5th Gear Shift Shaft - Kei Project Dragon Ball Z Star Manual Stick Shift Knob with Adapters Fits Most Cars (7 Star)
Kei Project Dragon Ball Z Star Manual Stick Shift Knob with Adapters Fits Most Cars (7

5th Gear Shift Shaft

A must have for DBZ fans. All of the Dragon balls are 2 inches in diameter. Doesn't get scratches easily and they are a similar size to most factory shift knobs so they'll fit great in your hands. Each have a metal threaded insert so they wont strip. They're threaded to fit just about any car. These MIGHT NOT fit in some automatic transmissions. Some would need an special adapters. Package include: 1 Dragonball z Shift Knob 3 High Quality Stainless Steel Adapters 4 Lock nuts Warning: Be careful to not over tighten when installing.

  • Color: 7 Star
  • Brand: Kei Project
  • ASIN: B0164U55AE
  • UPC: 796856521829
  • Part No: DBZ-7
5th Gear Shift Shaft - Rough Country Straight Shaft Shifter Extender Lower Gear Selector Compatible w/ 1997-2002 Jeep Wrangler TJ 1021
Rough Country Straight Shaft Shifter Extender Lower Gear Selector Compatible w/ 1997-2002 Jeep Wrangler TJ

5th Gear Shift Shaft

Is your body lift or transfer case drop giving your Jeep TJ shifting issues? Then check out Rough Country's new Jeep TJ Straight Shaft Lower Gear Selector. This innovative little product fixes a common issue with Manual Jeep TJ's that pop out of gear or do not properly engage 2nd, 4th, and reverse gears on Jeeps outfitted with either a transfer case drop kit or up to 2" body lifts. This product extends the height of the shifter 1/2" over stock height. Factory TJ gear selectors have a 1.25" offset bend towards the rear of the Jeep, while our design features a straight shaft for optimal height and clearance. Best of all, this item is easy to install! The Lower Gear Selector replaces the factory part and mounts perfectly with the existing shifter. No cutting, welding or other round-about adapters to fool with!

  • Color: Black
  • Brand: Rough Country
  • ASIN: B00CLV2AXQ
  • UPC: 843030100216
  • Part No: 1021
5th Gear Shift Shaft - Kartboy 5 Speed Shifter Bushings Combo for 08-14 WRX / 05-09 LGT 06-08 XT
Kartboy 5 Speed Shifter Bushings Combo for 08-14 WRX / 05-09 LGT 06-08

5th Gear Shift Shaft

The Kartboy Shifter & Bushing Combination matches Kartboy's 5 Speed short shift lever with their front shift bushings and rear shift bushing for a complete shift kit.Shift Lever:The Kartboy Short Shift Lever is constructed of CNC'd and TIG welded 4130 Cr-Mo steel. The Kartboy shifter replaces the stock lever and the overall shift throw is decreased by 40%, providing a noticeable difference and a solid feel.Front Shift Bushings: Kartboy's front black 95A durometer polyurethane shifter bushings replaces the OEM shifter mount bushings and helps to eliminate excessive play in the system for a more solid gear change.Rear Shifter Bushing: The Kartboy Rear Shifter Bushing is made from a black, 95A durometer polyurethane and stabilizes the shifter mounting base.Made in the USAFits: 2008-14 Subaru WRX, 2005-09 Legacy GT and 2006-08 Forester XT*Parts install in under 2 hours and will require jack stands.

  • Brand: Kartboy
  • ASIN: B07194Q1K3
  • Part No: KB-002-LEG-WRX08
5th Gear Shift Shaft - Corvette 6-Speed Skip Shift Eliminator : C5,C6,Z06,ZR1,Grand Sport
Corvette 6-Speed Skip Shift Eliminator : C5,C6,Z06,ZR1,Grand

5th Gear Shift Shaft

If you have disconnected the Computer Aided Gear Selection (CAGS) system, West Coast Corvettes 6-Speed Skip Shift Bypass will protect the open ends of the harness and prevent throwing trouble codes. These custom-designed harness plugs not only avoid dirt/corrosion problems associated with an open-ended harness, but also allow you to easily reconnect it, if necessary, with no modifications. Installation instructions included.

  • Color: black
  • Brand: West Coast Corvette / Camaro
  • ASIN: B0077CPV12
  • Part No: CAU-C5
5th Gear Shift Shaft - Black Path - Fits Dodge Ram 2500 & 3500 4x4 5th Gear Retainer 5.9L Cummins NV4500
Black Path - Fits Dodge Ram 2500 & 3500 4x4 5th Gear Retainer 5.9L Cummins

5th Gear Shift Shaft

Fits: 1994-2005 Dodge Ram 2500 & 3500 The New-Venture 4500 5-speed transmission has been a great workhorse for the Dodge Ram trucks. Unfortunately, the models designed for 4wd/4x4 operation have a common design flaw with the 5th-gear set-up. The lock nut which secures the 5th-gear assembly to the main shaft will vibrate loose over time and allow the 5th-gear assembly to works its way off the splines of the shaft, and no longer mesh with the companion gear. This causes the loss of use for 5th-gear, and can also cause significant damage to the transmission's mainshaft, resulting in very costly repairs. Common symptoms for the early stages of 5th-hear lock-nut failure include but are not limited to; excess transmission noise (especially in 5th-gear), jumpy/jerky 5th-gear driving, difficulty with engaging 5th-gear and or grinding when entering 5th-gear. Later stages may be as severe as complete loss of 5th-gear functionality, almost seeming as if you've shifted into neutral instead. If your truck is suffering from any of these symptoms, this may be the fix you need!

  • Color: Fifth Gear Retainer (black)
  • Brand: Black Path
  • ASIN: B01MEET1B9
  • Part No: AZ-BP T10
5th Gear Shift Shaft - Heavy Metal Suspensions - Fits 1994-2005 Dodge Ram 2500 and 3500 5th Gear Lock Nut Retainer 5.9L 6.7L NV4500 | Heavy Duty Carbon Steel Kit
Heavy Metal Suspensions - Fits 1994-2005 Dodge Ram 2500 and 3500 5th Gear Lock Nut Retainer 5.9L 6.7L NV4500 | Heavy Duty Carbon Steel

5th Gear Shift Shaft

Heavy Metal Guarantee☑ Easy Bolt-on Installation☑ Fast Shipping☑ Friendly Customer Service☑ Lifetime WarrantyApplication∙ 1994 - 2005 Dodge Ram 2500 (4WD)∙ 1994 - 2005 Dodge Ram 3500 (4WD)∙ NOTE: Will not fit 2WD models or Chevy/GMC NV4500Package Contents∙ (x1) 5th Gear Lock Nut Retainer∙ Installation Instruction We designed this Heavy Metal lock nut retainer to repair and prevent most 5th gear failure on 1994 - 2005 Dodge Ram 2500 (4WD) and 1994 - 2005 Dodge Ram 32500 (4WD), NV4500 Transmission. Over time, the NV4500 gear boxes, are prone to popping out of 5th gear and ultimately, total failure of 5th gear. This is a direct result of the factory main shaft lock nut coming loose. Heavy Metals Lock Nut Retainer is specifically designed to lock itself into the main shafts splines to keep the lock nut in place and eliminate any issues with the drivability of 5th gear. No additional parts are necessary if the Lock Nut Retainer is being installed as a preventative measure, however we do recommend replacing the lock nut if installing as a repair. The best part is that Heavy Metals Lock Nut Retainer can be installed without removing or disassembling the transmission. Also included are installation instructions and ASE certified telephone support.Heavy Metal Suspensions...

  • Brand: Heavy Metal Performance
  • ASIN: B07J1WLLXT
  • Part No: BB-HM T10(HM)
5th Gear Shift Shaft - PERRIN Shifter Stop Compatible with Subaru WRX 2015-2017 and 2018-19 WRX with OEM Short Shifter
PERRIN Shifter Stop Compatible with Subaru WRX 2015-2017 and 2018-19 WRX with OEM Short

5th Gear Shift Shaft

Feel the difference, instantly. Remove loose and sloppy shift gate feel within minutes--no special tools required. Due to the slop of the internals in the transmission, there is an unacceptable amount of horizontal slop within the 1st- and 2nd- gear shift gates. What should be little to no movement ends up being nearly 1.0 inch of play. This makes for an unnatural placement of shift gates and a lost feeling of which gear you are in. The PERRIN Shifter Stop removes this play, reducing the horizontal movement to 0.12 inches. This makes for a solid connection between the driver and transmission. The PERRIN Shifter Stop is perfectly designed to bolt directly to the shifter. Being constructed from 6061-T6 Aluminum allows for countless downshifts from 3rd to 2nd gear without worry of damaging the shifter stop or shifter. The PERRIN Shifter Stop is anodized black to provide a hard yet smooth surface for your shifter to rest against during 1st to 2nd gear shifts. This also keeps your shifter stop looking nice forever.

  • Color: Black
  • Brand: PERRIN
  • ASIN: B019D8RK5W
  • UPC: 791082887428
  • Part No: PSP-INR-018
5th Gear Shift Shaft - Gear Shift Shaft, New, International, 534120R91
Gear Shift Shaft, New, International,

5th Gear Shift Shaft

5th Gear Shift Shaft - New Starter Flex Shaft for Polaris 600 IQ Dragon 599cc 08 2008, 600 IQ LX 599cc 07 08 2007 2008, 600 IQ LXT 599cc 11 12 13 14 15 2011 2012 2013 2014 2015, 600 IQ Shift 599cc 10 11 12 2010 2011 2012
New Starter Flex Shaft for Polaris 600 IQ Dragon 599cc 08 2008, 600 IQ LX 599cc 07 08 2007 2008, 600 IQ LXT 599cc 11 12 13 14 15 2011

5th Gear Shift Shaft

  • Model: SFS1002
5th Gear Shift Shaft - New Starter Flex Shaft for Polaris 550 IQ LXT 544cc 11 12 13 2011 2012 2013, 550 IQ Shift 544cc 10 11 12 13 2010 2011 2012 2013, 550 Shift 544cc 11 12 13 2011 2012 2013 3280492, 6230385
New Starter Flex Shaft for Polaris 550 IQ LXT 544cc 11 12 13 2011 2012 2013, 550 IQ Shift 544cc 10 11 12 13 2010 2011 2012 2013, 550 Shift

5th Gear Shift Shaft

  • Model: SFS1002
5th Gear Shift Shaft - Johnson Evinrude OMC New OEM Shift Shaft O-Ring, Lower Unit Drive, 0318372
Johnson Evinrude OMC New OEM Shift Shaft O-Ring, Lower Unit Drive,

5th Gear Shift Shaft

5th Gear Shift Shaft - Mercury - Mercruiser 23-77631A 2 Mercury Quicksilver 23-77631A 2 Shift Shaft Housing Bushing-
Mercury - Mercruiser 23-77631A 2 Mercury Quicksilver 23-77631A 2 Shift Shaft Housing

5th Gear Shift Shaft

  • Model: 23-77631A 2
5th Gear Shift Shaft - James Gasket 11161 Retaining Ring - 5th Gear
James Gasket 11161 Retaining Ring - 5th

5th Gear Shift Shaft

  • Model: Retaining Ring - 5th Gear
5th Gear Shift Shaft - James Gasket 11113 5th Gear Transmission O-Ring for 5-Speed XL
James Gasket 11113 5th Gear Transmission O-Ring for 5-Speed

5th Gear Shift Shaft

  • Model: 5th Gear Transmission O-Ring for 5-Speed XL

Geo Metro 5th gear, slider, and shift fork replacement

5th Gear Shift Shaft

had our 1990 Geo metro 1.0 5 speed manual popping out of 5th gear while on the freeway consistently. found some info online but no videos. so i figured the least talking and the most straight forward, no b.s. diy video on how to fix it.

  • Likes: 6
  • View count: 144
  • Dislikes: 0
  • Comments:
Tags: Geo,Metro,1.0,5 speed,1.3,transmission,trans,5th gear,5th,popping,out,fix,repair,change,chevy,suzuki,swift,gti,lsi,xfi,easy,fast,diy,D.I.Y.,yourself,problems,issues,synchro,fork...

5th Gear Shift Shaft J2548 Search Results

Looking for more 5th Gear Shift Shaft similar ideas? Try to explore these searches: Usa Marker Light, Floral Machine, and Salty Chunk.

FindShopent.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.