Compare Prices

Board Shield

Board Shield - Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino
Aideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for

Board Shield

This is a small and simple Arduino nano expansion board. It will lead out all the Nano pins, it is convenient for us to wiring and experiment. Features: Great for temporary things you don't want to solder. It provided a nice platform for wiring circuits to an Arduino Nano. It can be used in conjunction with or in place of a breadboard. It lets you make a temporary circuit without the reliability issues you get with prototyping boards, but maybe need a bit more effort. You need to use your Nano to hold the black pin headers straight and flat during soldering. Size: about 2.21" x 1.65" x 0.50" (L* W* H) Package Included: 5 x Nano Terminal Adapter Expansion Boards

  • Brand: Aideepen
  • ASIN: B0788MLRLK
  • Part No: 70100945
Board Shield - Alloet 5Pcs Mini Breadboard Prototyping Prototype Shield ProtoShield for Arduino UNO
Alloet 5Pcs Mini Breadboard Prototyping Prototype Shield ProtoShield for Arduino

Board Shield

Specification: 100% Brand new and high quality. Working temperature:-40 ℃-80 ℃. All epoxy sealed containers with Waterproof Housing Light compact, convenient to use and transport Non-isolated,synchronous rectification High efficiency:>94% Reliable, low heat dissipation Low power consumption, high conversion rate With reverse connect protection, output short circuit protection, over current protection, over temperature protection, stable performance. Package: 1x Car Charger Regulator Converter

  • Color: 5Pcs
  • Brand: Alloet
  • ASIN: B01N55OWBY
  • UPC: 647904948054
  • Part No: 120776.120782.120787
Board Shield - HiLetgo 2pcs Uno R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino UNO ProtoShield
HiLetgo 2pcs Uno R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino UNO

Board Shield

Duemilanove used in conjunction with ProtoShieldprototype extension boards, used to build the circuit prototypes directly on the board welding components, mini bread plate above can also be connected to the circuit.Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate. The ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very fit and For Arduino with the build circuit prototype. Features: Small soldering area. All pins are brought to the top level. 5V, GND, and Raw pins are exposed as well. SOIC place for IC. The mini breadboard has 170 tie points. Prototype Size:7cm x 5.5cm x 2cm . Mini breadboard size: 4.4 * 3.4 * 1cm . Package Included: 2 * Uno R3 Prototyping Shield Prototype Expansion Board 2 * Mini breadboard

  • Color: Blue
  • Brand: HiLetgo
  • ASIN: B00HHYBWPO
  • UPC: 797698770000
  • Part No: 3-01-0053
Board Shield - Electronics-Salon 10PCS Prototype PCB for Arduino UNO R3 Shield Board DIY, Combo 2mm+2.54mm Pitch.
Electronics-Salon 10PCS Prototype PCB for Arduino UNO R3 Shield Board DIY, Combo 2mm+2.54mm

Board Shield

Prototype PCB for Arduino UNO R3 Shield Board DIY, Combo 2mm + 2.54mm Pitch. Quantity: a lot of 10 pieces. PCB Dimension: 68.58mm x 53.34mm / 2.7" x 2.1" PCB Thickness: 1.6mm Material: high quality FR-4 glass fiber PCB. All holes are plated through Top and bottom side are identical copper layers. Pads pitch: In the white frame range: 2.00mm / 0.079", hole diameter 0.8mm / 0.031". Other pads pitch: 2.54mm / 0.1", hole diameter 0.9mm / 0.035". If you want buy these tall header socket connectors, you can visit my store.

  • Brand: CZH-LABS
  • ASIN: B01L4BM2WM
  • Part No: PCB-D1023-10.
Board Shield - Wal front Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31 Arduino
Wal front Prototype Screw Terminal Block Shield Board Kit MEGA-2560 R31

Board Shield

Specifications: PCB: PCB size 12.024 × 7.72cm/4.73 × 3.04inch Pads grid / pitch: 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch: 3.5mm / 0.138", hole diameter 1.2mm. Terminal Block: Pitch: 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs,2pole x6pcs). Wire range: 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass. Female Header Socket: Pitch: 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin × 1pcs, single row 8pin × 5pcs, dual row 18pin × 1pcs Weight:73g Package includes: 1 set × Terminal Block Shield Board Kit

  • Brand: Wal front
  • ASIN: B07JM8RWS9
  • UPC: 757686438442
  • Part No: Wal front6dgrgb9etm
Board Shield - Electronics-Salon 4x Prototype Breakout PCB Shield Board Kit for Raspberry Pi 3 2 B+ A+, Breadboard DIY.
Electronics-Salon 4x Prototype Breakout PCB Shield Board Kit for Raspberry Pi 3 2 B+ A+, Breadboard

Board Shield

Suitable for Raspberry Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 1 Model A+. Quantity: a lot of 4 sets. PCB Material: high quality FR-4 glass fiber PCB. Dimensions: 56mm x 65mm / 2.20" x 2.56", Thickness: 1.6mm / 0.063" Top to bottom layer all solder pad holes are plated through, pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm. Package included: 4x PCBs, 4x 2x20pin connectors, 16x M2.5 11mm brass standoffs, 32x M2.5x4mm metal screws.

  • Brand: CZH-LABS
  • ASIN: B07BF8Z3HS
  • Part No: MD-D1133U-4
Board Shield - HiLetgo Nano I/O Expansion Sensor Shield for Arduino UNO R1 Nano 3.0 Duemilanove 2009
HiLetgo Nano I/O Expansion Sensor Shield for Arduino UNO R1 Nano 3.0 Duemilanove

Board Shield

Features : Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble free manner. It is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x. This expansion shield provides: *14 I/O Pin (servo type with GND, power and signal) *8 analog Pin with power output and GND *6 PWM Pin *1 Servo power input *I2C expansion Pin *AREF output *3.3V output Package Included: 1 * Nano I / O Expansion Sensor Shield

  • Color: Red
  • Brand: HiLetgo
  • ASIN: B00OLBDXC6
  • UPC: 697313324215
  • Part No: 3-01-1035-1
Board Shield - ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks
ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting

Board Shield

We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We’d like to receive your valuable suggestions for our products and make your idea come true. 830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrix White plastic, with black legend. Colored power rails For wires 21 to 26 AWG 2-sided peelable adhesive tape Component listing: 3pcs 830 tie-points breadboard

  • Color: 1)830*3
  • Brand: ELEGOO
  • ASIN: B01EV6LJ7G
  • UPC: 746591612382
  • Part No: EL-CP-003
Board Shield - WINGONEER® Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY
WINGONEER® Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3

Board Shield

WINGONEER trademark Reg.NO:4747611WINGONEER Prototype Screw / Terminal Block Shield Board Kit For ArduinoMEGA-2560 R3The Kit include Prototype PCB, Terminal Blocks, Female Header Sockets.Unassembled, variety mount methods, you can make flexible use.PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm.Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm.Terminal Block:Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ).Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass.Female Header Socket:Pitch 0.1"/2.54mm, pin length 15mm / 0.59"Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs.Note: This is not original Arduino product. It only a substitute accessories from WINGONEERPackage included:1x WINGONEER PCB Board

  • Brand: WINGONEER®
  • ASIN: B01FTX0GZQ
  • UPC: 662578899303
  • Part No: T0339
Board Shield - 4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Arduino Proto Shield Distribution Connecting Blocks
4PCS Breadboards Kit Include 2PCS 830 Point 2PCS 400 Point Solderless Breadboards for Arduino Proto Shield Distribution Connecting

Board Shield

830 tie points breadboards: 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails 400 tie points breadboards: 300 tie-point ic-circuit area plus 2x50 tie-point distribution strips providing 4 power rails The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color. 2-Sided Peelable Adhesive Tape,Easy to Stick on the Arduino Prototype Shield,Suitable for Line Prototype Design. Wire size: Suitable for 20-29 AWG wires. Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet. Voltage / Current: 300V/3-5A. Package includes: 2PCS 830 Tie-Points Breadboard 2PCS 400 Tie-Points Breadboard

  • Brand: REXQualis
  • ASIN: B07DL13RZH
  • Part No: RQ-BK-002
Board Shield - Sierra 116-337-0380 Shields Silverado 4000 Outboard Fuel Line, 3/8
Sierra 116-337-0380 Shields Silverado 4000 Outboard Fuel Line, 3/8" Bulk

Board Shield

  • Model: 116-337-0380
  • Size: 3/8" Bulk Pack3/8
Board Shield - 8 Skateboard Longboard Bearings PRECISION ABEC 9 RED SHIELD With Spacers Washers
8 Skateboard Longboard Bearings PRECISION ABEC 9 RED SHIELD With Spacers

Board Shield

  • Size: 608
Board Shield - 8 Skateboard Longboard Bearings PRECISION ABEC 9 BLACK SHIELD
8 Skateboard Longboard Bearings PRECISION ABEC 9 BLACK

Board Shield

  • Size: 608
Board Shield - Works with Official Arduino Boards Prototyping Shield PCB Board for Arduino
Works with Official Arduino Boards Prototyping Shield PCB Board for

Board Shield

Board Shield - 608ZZ Precision Skateboard Bearings 8x22x7mm Double Shielded Silver (Pack of 8)
608ZZ Precision Skateboard Bearings 8x22x7mm Double Shielded Silver (Pack of

Board Shield

  • Size: 608
Board Shield - Micro SD Storage Board TF Card Shield Module SPI Interface For Arduino
Micro SD Storage Board TF Card Shield Module SPI Interface For

Board Shield

Board Shield - Multi-Function Funduino Nano Shield Nano Sensor Expansion Board
Multi-Function Funduino Nano Shield Nano Sensor Expansion

Board Shield

DnD Shield Fighter Adding Sword & Board Combat to Your Game Dungeons and Dragons Character Builds

Board Shield

Nerdarchy the News Letter- http://nerdarchynewsletter.gr8.com/ DnD Shield Fighter Adding Sword & Board Combat to Your Game Dungeons and Dragons Character Builds Nerdarchy has seen a ton of requests for a D&D character build using a shield so here it is. We look several warrior build before settli...

  • Likes: 854
  • View count: 52052
  • Dislikes: 16
  • Comments:
Tags: DnD,Shield,Fighter,Combat,Dungeons and Dragons Character Builds,fighting style,min-maxing,character,5e D&D feat,warrior,knight,unearthed arcana,role-playing game (game genre),pc...

Board Shield Z5510 Search Results

Looking for more Board Shield similar ideas? Try to explore these searches: Tan Buck, Wypall Cloths, and L-arginine 50 Capsules.

FindShopent.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.