Compare Prices

Ducted Fume Hoods

Ducted Fume Hoods - Cole-Parmer Ducted Island Canopy Fume Hood, 36
Cole-Parmer Ducted Island Canopy Fume Hood, 36"

Ducted Fume Hoods

Constructed of chemical-resistant composite materials, these molded, one-piece canopy hoods are lightweight and designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with baths and circulators, small mixers, hot plates, or other equipment. If your application requires hood material of 304 stainless steel, contact our application specialists. To customize your canopy hood, order clear fiberglass side panels separately below. Side panels attach directly to side of hood and help to contain fumes and minimize effects of Cross drafts. Vapor-proof incandescent light fixture 33731-88 adds additional light to your working area and mounts easily to the inside of your canopy. Wall and corner hoods come with installation hardware. Island hoods require mounting Kit 33731-85 which includes four 10-ft (3 m) long suspension Rods. Other rod lengths are available — contact an application specialist for more information. Note: canopy hoods require exhausting to the outside or into existing ventilation. Exhaust blower not included. Capture and eliminate contaminated air at the source choose from wall, island, or corner styles. Easily incorporate into existing labs and classrooms.

  • Brand: Cole-Parmer
  • ASIN: B01M9DHOST
  • Part No: AO-33731-38
Ducted Fume Hoods - Cole-Parmer Ducted Wall Canopy Fume Hood, 36
Cole-Parmer Ducted Wall Canopy Fume Hood, 36"

Ducted Fume Hoods

Constructed of chemical-resistant composite materials, these molded, one-piece canopy hoods are lightweight and designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with baths and circulators, small mixers, hot plates, or other equipment. If your application requires hood material of 304 stainless steel, contact our application specialists. To customize your canopy hood, order clear fiberglass side panels separately below. Side panels attach directly to side of hood and help to contain fumes and minimize effects of Cross drafts. Vapor-proof incandescent light fixture 33731-88 adds additional light to your working area and mounts easily to the inside of your canopy. Wall and corner hoods come with installation hardware. Island hoods require mounting Kit 33731-85 which includes four 10-ft (3 m) long suspension Rods. Other rod lengths are available — contact an application specialist for more information. Note: canopy hoods require exhausting to the outside or into existing ventilation. Exhaust blower not included. Capture and eliminate contaminated air at the source choose from wall, island, or corner styles. Easily incorporate into existing labs and classrooms.

  • Brand: Cole-Parmer
  • ASIN: B01MF9Z9DL
  • Part No: AO-33731-30
Ducted Fume Hoods - 24
24" Wide Ducted Fume Hood

Ducted Fume Hoods

Compact, sturdy, cost-effective: Sentry Air's 24" Wide Ducted Exhaust Hood may be an excellent choice for applications that require a compact, exterior-ducting fume hood. Fume Control for a Variety of Processes: Typically, exhaust hoods may be used in chemical laboratories- especially those evaporating large amounts of volatile organics, chemicals with low odor thresholds, heavy powder and capsule filling, solvent vapor control, and a variety of other processes that require exterior fume exhaust. High-Quality Materials & Design: This benchtop unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top, and a polycarbonate hinged sloping front lid. It is extremely compact and light weight. The 24" Wide Ducted Exhaust Hood can be an effective and economical tool for air quality enhancement in many commercial, chemical, medical, laboratory, and industrial applications. This unit does not come with ducting or fan.

  • Brand: Sentry Air Systems, Inc.
  • ASIN: B07RC2JQ47
  • Part No: SS-324-E
Ducted Fume Hoods - 40
40" Wide Ducted Fume Hood

Ducted Fume Hoods

Fume Control for a Variety of Processes: The 40" Wide Ducted Fume Hood, often identified as an exterior-ducting exhaust hood, is a very popular model among laboratories, pharmacies, manufacturing facilities, research & development departments, and a variety of additional environments that require a hooded enclosure for their current or new fan and ducting system. Ducted Fume Hoods are typically used during applications where filtration media may not be effective because of the volume of materials used or filter incompatibility. Typical uses include Solvent Vapor Control, Epoxy Fume Extraction, Powder & Capsule Filling Processes, Light Acid Etching Processes, Volatile Organic Use, Asbestos Particulate Control, and a variety of other processes that require exterior fume exhaust. Practical Design: The thoughtful design of these systems ensures that it is suitable for standard 24" deep countertops. High-Quality Materials: The standard materials used for this hood include a high-density polyethylene base, acrylic sides, and clear polycarbonate top and front lid. These materials were selected for their chemical and corrosion resistance and impact resistance. The 40" Wide Ducted Exhaust Hood can be an effective and economical tool for air quality enhancement in many commercial, chemical...

  • Brand: Sentry Air Systems, Inc.
  • ASIN: B07RCBZKVR
  • Part No: SS-340-E
Ducted Fume Hoods - 30
30" Wide Ducted Fume Hood

Ducted Fume Hoods

Fume Control for a Variety of Processes: Sentry Air's 30" Wide Ducted Exhaust Hood may be an excellent choice for applications that require a compact, exterior-ducting fume hood. Typically, exhaust hoods may be used in chemical laboratories- especially those evaporating large amounts of volatile organics, chemicals with low odor thresholds, heavy powder and capsule filling, solvent vapor control, and a variety of other processes that require exterior fume exhaust. High-Quality Materials & Design: This benchtop unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top, and a polycarbonate hinged sloping front lid. It is extremely compact and light weight. The 30" Wide Ducted Exhaust Hood can be an effective and economical tool for air quality enhancement in many commercial, chemical, medical, laboratory, and industrial applications. This unit does not come with ducting or fan.

  • Brand: Sentry Air Systems, Inc.
  • ASIN: B07RCB7NWT
  • Part No: SS-330-E
Ducted Fume Hoods - Bel-Art Large Molded Polyethylene Fume Hood with Acrylic Sash; 42 x 20 x 30 in. (H50000-0003)
Bel-Art Large Molded Polyethylene Fume Hood with Acrylic Sash; 42 x 20 x 30 in.

Ducted Fume Hoods

The Bel-Art 500000003 Scienceware fume hood has a large (30 x 20 x 42 inches [H x W x D]) body, with a molded, one-piece, polyethylene hood that slides up and down on inside tracks, and has a choice of open, closed, or intermediate door positions. A fume hood is a ventilation device used by researchers, educators, and culinary professionals to extract or filter gases, vapors, fumes or dust from an area to facilitate a safe working environment. The fume hood door opening measures 14.2 x 34.5 inches/36 x 88 cm (H x W), and has a 6-inch (15 cm) outer diameter (OD) exhaust stack. A molded, one-piece, outer polyethylene shell provides durability and chemical-resistance. A clear acrylic door provides visibility. When the door is in a closed position, the sash remains slightly open to facilitate continuous air flow. Curved interior corners allow for air flow circulation, and cleaning ease. The unit works with an exhaust system (required, and not included) that draws free air at 350 cubic feet per minute (CFM). The 500000003 fume hood weighs 25.5 kg (56 lb.). A fume hood is a ventilation device used by researchers, educators, and culinary professionals to extract or filter gases, vapors, fumes, dust or other airborne contaminants from an area, or to contain the effect of a spill to facil...

  • Brand: SP Scienceware
  • ASIN: B002VBWARM
  • Part No: 500000003
Ducted Fume Hoods - Labconco 5441803 AtmosPure Hard-Ducted Circulation Tubing Kit for Double Width Protector Glove Boxes
Labconco 5441803 AtmosPure Hard-Ducted Circulation Tubing Kit for Double Width Protector Glove

Ducted Fume Hoods

AtmosPure Circulation Tubing Kits include the necessary plumbing to make the connection from the AtmosPure to the glove box.

  • Brand: Labconco
  • ASIN: B00BWXKJ50
  • Part No: 5441803
Ducted Fume Hoods - Labconco 5441802 AtmosPure Hard-Ducted Circulation Tubing Kit for Single Width Protector Glove Boxes
Labconco 5441802 AtmosPure Hard-Ducted Circulation Tubing Kit for Single Width Protector Glove

Ducted Fume Hoods

AtmosPure Circulation Tubing Kits include the necessary plumbing to make the connection from the AtmosPure to the glove box.

  • Brand: Labconco
  • ASIN: B00BWXKI38
  • Part No: 5441802
Ducted Fume Hoods - 18
18" Wide Ducted Fume Hood

Ducted Fume Hoods

Compact, sturdy, cost-effective: The 18" Wide Ducted Fume Hood is an optimal compact fume control solution for limited space environments or small-scale operations. Fume Control for a Variety of Processes: Ducted Fume Hoods are useful for applications where filtration may not be effective because of heavy volumes or filter efficiency issues. Typical applications include research & development processes, powder containment (e.g. pharmaceutical compounding) chemical fume control, mobile laboratories and field research, light acid etching, and a variety of other processes that require particulate or chemical fume extraction. High-Quality Materials & Design: This benchtop unit features unique hinged folding side panels, a high-density polyethylene base, a clear polycarbonate top, and a polycarbonate hinged sloping front lid. It is extremely compact and light weight. The 18" Wide Ducted Fume Hood can be an effective and economical tool for air quality enhancement in many commercial, chemical, medical, laboratory, and industrial applications. Please note that ducting and fan are not included with this product.

  • Brand: Sentry Air Systems, Inc.
  • ASIN: B07R6TV7KD
  • Part No: SS-218-E
Ducted Fume Hoods - Cosmo 5U30 30-in Under-Cabinet Range Hood 250-CFM with Ducted/ Ductless Convertible Top/ Back Duct, Slim Kitchen Over Stove Vent LED Light, 3 Speed Exhaust Fan, Reusable Filter (Stainless Steel)
Cosmo 5U30 30-in Under-Cabinet Range Hood 250-CFM with Ducted/ Ductless Convertible Top/ Back Duct, Slim Kitchen Over Stove Vent LED Light, 3 Speed Exhaust Fan, Reusable Filter (Stainless

Ducted Fume Hoods

Less is more with the Cosmo COS-5U30 under cabinet range hood. Featuring a slim profile and virtually seamless design that complements a variety of kitchen designs. Quickly and quietly remove odor with 250 CFM of suction. Requiring only simple installation under an existing cabinet, its stainless steel body, electronic push controls, and energy efficient lighting makes it a smart choice for any kitchen makeover. Three fan speeds are available with a set of mesh filters that can be quickly cleaned by hand. Hood for hardwired installation only.

  • Color: Stainless Steel
  • Brand: Cosmo
  • ASIN: B01NACQJ94
  • UPC: 850666006775
  • Part No: COS-5U30
Ducted Fume Hoods - Broan 30 Inch Stainless Steel ADA Capable Non Ducted Under Cabinet Range Hood
Broan 30 Inch Stainless Steel ADA Capable Non Ducted Under Cabinet Range

Ducted Fume Hoods

  • Model: BR-413004
  • Color: Silver
  • Size: 30 inches30\"
Ducted Fume Hoods - ZLINE 760 CFM Ducted Wall Mount Range Hood
ZLINE 760 CFM Ducted Wall Mount Range

Ducted Fume Hoods

  • Model: KB2-CXS-30
  • Color: Bronze
  • Size: 5" x 30"
Ducted Fume Hoods - ZLINE 1200 CFM Ducted Wall Mount Range Hood
ZLINE 1200 CFM Ducted Wall Mount Range

Ducted Fume Hoods

  • Size: 18" H x 48" W x 24" D18\" H x 48\" W x 24\" D
Ducted Fume Hoods - Broan 4136 36
Broan 4136 36" Wide Steel Non Ducted Under Cabinet Range Hood with Charcoal

Ducted Fume Hoods

  • Model: 413623
  • Color: Black
Ducted Fume Hoods - XtremeAir 30'' Ultra 900 CFM Ducted Under Cabinet Range Hood
XtremeAir 30'' Ultra 900 CFM Ducted Under Cabinet Range

Ducted Fume Hoods

  • Model: UL13-U30
  • Color: SilverStainless SteelStainless LookSilver/MetallicOther
Ducted Fume Hoods - ProLine Range Hoods 42'' 1200 CFM Ducted Wall Mount Range Hood
ProLine Range Hoods 42'' 1200 CFM Ducted Wall Mount Range

Ducted Fume Hoods

  • Color: SilverStainless Steel
Ducted Fume Hoods - ProLine Range Hoods 30'' 600 CFM Ducted Under Cabinet Range Hood
ProLine Range Hoods 30'' 600 CFM Ducted Under Cabinet Range

Ducted Fume Hoods

  • Model: PLJW 185
  • Color: SilverStainless Steel
  • Size: 30\"30"

How to Make a Fume Hood Part 4 - Ducting and Testing

Ducted Fume Hoods

The fourth and final part in my how to make a fume hood series. I hope you all have enjoyed this series, and I would be happy if you would show appreciation by pressing the like button or subscribing to my channel! This fume hood will be in a lot of my future videos.

  • Likes: 184
  • View count: 45078
  • Dislikes: 11
  • Comments:
Tags: How,to,To,make,Make,fume,Fume,Hood,hood,Fumehood,fumehood,easy,cheap,DIY,diy,Do It Yourself (Hobby)

Ducted Fume Hoods W4113 Search Results

Looking for more Ducted Fume Hoods similar ideas? Try to explore these searches: Ecc Registered Ddr Dimm Memory, John Deere Ride Tractors, and Flower Basket Cake.

FindShopent.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.