Compare Prices

Flame Detector

Flame Detector - Honeywell C554A-1794 Cadmium Sulfide Flame Detector with 60
Honeywell C554A-1794 Cadmium Sulfide Flame Detector with 60"

Flame Detector

On flame failure, the light sensitive cadmium sulfide cell, in conjunction with flame sensing circuitry, causes the protector lay control to shutdown the main oil burner.

  • Brand: Honeywell
  • ASIN: B00096JC7M
  • UPC: 085267037877
  • Part No: 0930ERUG57M
Flame Detector - IR Flame Sensor Module Detector Smartsense For Temperature Detecting Compatible With Arduino by Atomic Market
IR Flame Sensor Module Detector Smartsense For Temperature Detecting Compatible With Arduino by Atomic

Flame Detector

Manufactured By Atomic Market 1.can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test 2.the detection angle of 60 degrees or so, particularly sensitive to the flame spectrum 3.sensitivity adjustable (shown in blue digital potentiometer adjustment) 4. the comparator output signal clean, good waveform, driving ability, more than 15mA 5. with adjustable precision potentiometer sensitivity adjustment 6. the working voltage of 3.3V-5V 7. the output format: DO digital switching outputs (0 and 1) and AO analog voltage output 8. a fixed bolt holes for easy installation 9. PCB Size: 3.2cm x 1.4cm 10. using a wide voltage LM393 comparator Instructions for use: 1, the flame sensor flame most sensitive to ordinary light is also a reaction, generally used as a flame alarm purposes. 2, the output interface can be directly connected to the microcontroller IO port. 3, with the flame sensor to maintain a certain distance, so as not to damage the sensor temperature, the flame of a lighter test distance 80cm, for the greater flame, the farther the distance test. 4, analog output and the AD conversion process, can achieve higher accuracy.

  • Brand: Atomic Market
  • ASIN: B00TNOHTV2
  • Part No: accessory-175
Flame Detector - Protech 62-23543-06 Flame Sensor
Protech 62-23543-06 Flame

Flame Detector

Flame sensor - intermittent pilot - rheem/ruud/protech - a complete line of oem and factory Replacement parts for your furnace; air conditioner; water heater; air handler; boiler; rooftop unit and more.

  • Brand: Protech
  • ASIN: B009AXH13W
  • UPC: 662766419276
  • Part No: 62-23543-06
Flame Detector - Trane SEN01114 Flame Sensor
Trane SEN01114 Flame Sensor

Flame Detector

This is an O.E.M. authorized part. Fits various Trane models. OEM Part Number SEN01114. Made in United States.

  • Brand: Trane
  • ASIN: B00ECEENHG
  • UPC: 767654642740
  • Part No: SEN01114
Flame Detector - PFS401 Universal Furnace Electrode Flame Sensor for Carrier replaces White Rodgers 760-401, 31380679
PFS401 Universal Furnace Electrode Flame Sensor for Carrier replaces White Rodgers 760-401,

Flame Detector

Flame sensor for Hot Surface Ignition (H.S.I.) systems Can be mounted remotely on multiple burners or adjacent to igniter on other applications For use with spark ignition and flame sensing High quality alumina ceramic insulator High temperature kanthal flame rod material that can withstand 1800°F Features Teflon insulated (250°C rating) lead wire Single screw, plated steel mounting bracket Single rod 30 Inch lead with a female connection Probe length 3 inch

  • Brand: Packard
  • ASIN: B00HE0BLDO
  • UPC: 638876921275
  • Part No: PFS401- 760-401
Flame Detector - Honeywell C7027A1023 Ultraviolet Flame Detector
Honeywell C7027A1023 Ultraviolet Flame

Flame Detector

Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.

  • Color: C7027A1023
  • Brand: Honeywell
  • ASIN: B003CVRAMA
  • UPC: 085267038744
  • Part No: C7027A1023
Flame Detector - OEM Upgraded Replacement for Goodman Furnace Flame Sensor B11726-06 by part
OEM Upgraded Replacement for Goodman Furnace Flame Sensor B11726-06 by

Flame Detector

Replacement Flame Sensor Rod part number SP208.Direct Replacement for number 0130F00010.Replacement for old style number B11726-06.Rod Measures 2 Inches Long.1/4 inch Male Terminal for Wire Connection.

  • Color: white
  • Brand: part
  • ASIN: B00ECEF0V4
  • Part No: B11726-06
Flame Detector - Oiyagai 5pcs IR Flame Sensor Module Detector Smartsense for Temperature Detecting Compatible with Arduino
Oiyagai 5pcs IR Flame Sensor Module Detector Smartsense for Temperature Detecting Compatible with

Flame Detector

Description:1.can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test2.the detection angle of 60 degrees or so, particularly sensitive to the flame spectrum3.sensitivity adjustable (shown in blue digital potentiometer adjustment)4. the comparator output signal clean, good waveform, driving ability, more than 15mA5. with adjustable precision potentiometer sensitivity adjustment6. the working voltage of 3.3V-5V7. the output format: DO digital switching outputs (0 and 1) and AO analog voltage output8. a fixed bolt holes for easy installation9. PCB Size: 32mm x 14mm10. using a wide voltage LM393 comparatorInstructions for use:1. the flame sensor flame most sensitive to ordinary light is also a reaction, generally used as a flame alarm purposes.2. the output interface can be directly connected to the microcontroller IO port.3. with the flame sensor to maintain a certain distance, so as not to damage the sensor temperature, the flame of a lighter test distance 800mm, for the greater flame, the farther the distance test.4. analog output and the AD conversion process, can achieve higher accuracy.Package Content:5 x IR Flame Sensor Module

  • Brand: Oiyagai
  • ASIN: B077799TGS
  • UPC: 765470381744
  • Part No: 7545810131
Flame Detector - KONDUONE 52W29 Flame Sensor Replacement for Lennox Furnace Flame Sensor - Replaces 52W2901 LB-74940A 31L71 31L7101 - Fits for G40 G41 G50 G51 G60 G61 G71
KONDUONE 52W29 Flame Sensor Replacement for Lennox Furnace Flame Sensor - Replaces 52W2901 LB-74940A 31L71 31L7101 - Fits for G40 G41 G50 G51 G60 G61

Flame Detector

Part Information: 52w29 Flame Sensor Approx. 5.25" (can be shortened). Condition: New Replaces Part Number: The flame sensor fit many furnace. Diretly replaces 52w29, 52W2901, 31L71, LB-74940A, 31L7101, 28PV41, etc. Compatible Brands: Lennox, Armstrong, Ducane, Allied, Concord, etc. Supported Models: Not all applicable models are listed - Please contact us if you don't see yours Lennox - Furnace (G40DF) 45, 45X, 70, 70X, 90, 90X, 110, 110X, 135, 155 (G40UH) 45, 45X, 70, 70X, 90, 90X, 110, 110X, 135, 155 (G41UF) 45, 70, 90, 110, 135 (G43UF) 45, 70, 90, 90H, 110, 110H, 135 (G50DF) 45, 45X, 70,70X ,90, 90X, 110, 110X, 135 (G50UH)45, 45X, 70, 70X, 90, 90X, 110, 110X, 135, 155, I70, I70X, I90. I90XI 110, I110X, I135 (G50UHI) I70, I70X, I90, I90X, I110, I110X, I135 (G51MP) 45, 70, 90, 110, 135 (G60DF) 45, 45X, 70, 70X, 90, 110, 135, V70, V70X, V90, V90X, V110, V110X, V135 (G60DFV) V70, V70X, V90, V90X, V110, V110X, V135 (G60UH) 45, 45X, 70, 70X, 90, 90X, 110, 110X, 135, V70, V70X, V90, V90X, V110, V110X, V135 (G60UHV) V70, V70X, V90, V90X, V110, V110X, V135 (61MP) 45, 70, 90, 110, 135, V45, V70, V90, V91, V110, V111, V135 (61MPV) V45, V70, V71, V90, V91, V110, V111, V135 Any question please contact us and we promise to work hard to help you to solve this problem.

  • Brand: KONDUONE
  • ASIN: B07MYSN73Z
  • UPC: 764425757726
  • Part No: FBA 50000139
Flame Detector - York S102537499000 Flame Sensor
York S102537499000 Flame

Flame Detector

'Flame Sensor, Fits Brand York, For Use With Universal'

  • Brand: part
  • ASIN: B0195UW8KA
  • Part No: S1-02537499000
Flame Detector - Furnace Flame Sensor replaces Goodman, AP4513976, 0130F00010
Furnace Flame Sensor replaces Goodman, AP4513976,

Flame Detector

Flame Detector - TRANE SEN01114 Nikrothal 80 Flame Sensor G1966916
TRANE SEN01114 Nikrothal 80 Flame Sensor

Flame Detector

  • Color: Multicolor
Flame Detector - SUPCO FSC10 Flame Sensor Cleaner,2 in. L,Steel,Red
SUPCO FSC10 Flame Sensor Cleaner,2 in.

Flame Detector

  • Color: Red
Flame Detector - 52W2901 52W29 Flame Sensor for Lennox, Armstrong, Ducane Furnaces
52W2901 52W29 Flame Sensor for Lennox, Armstrong, Ducane

Flame Detector

Flame Detector - 62-23543-01 Flame Sensor Rod for , Ruud and Weatherking Furnaces, Termination: 1/4 inch male quick connect By Rheem Ship from US
62-23543-01 Flame Sensor Rod for , Ruud and Weatherking Furnaces, Termination: 1/4 inch male quick connect By Rheem Ship from

Flame Detector

Flame Detector - Flame Sensor, Straight Rod 1/4
Flame Sensor, Straight Rod 1/4" Male Terminal,

Flame Detector

Flame Detector - 338906 FLAME SENSOR
338906 FLAME SENSOR

Flame Detector

X3301 - Multispectrum IR Flame Detector (English)

Flame Detector

  • Likes:
  • View count: 7358
  • Dislikes:
  • Comments:
Tags:

Flame Detector V5224 Search Results

Looking for more Flame Detector similar ideas? Try to explore these searches: World Beach Ball, Capital Hearth, and Gourmet Cookset.

FindShopent.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.