Compare Prices

G2 Ergonomics Throttle Cam

G2 Ergonomics Throttle Cam - G2 Ergonomics G2-20-200 - Throttle Cam System
G2 Ergonomics G2-20-200 - Throttle Cam

G2 Ergonomics Throttle Cam

The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle.  This slightly longer pull makes a HUGE difference in rider control as the power is rolled on.  The system comes with a "100CAM" - same as stock, "200CAM" - starts out 10% smaller than stock and "400CAM" - starts out 20% smaller than stock.  The radius of the 200CAM and 400CAM increases or "ramps up" to stock size at  ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation. Fits: KTM 2 stroke models 85-300cc (97-16), KTM 85 (17-18), Husky 85, (17-18), Husaberg 2 strokes (all), Husqvarna 2 strokes (97-16) THIS PART DOES NOT FIT 17-18 KTM/HUSKY 2 STROKE MODELS!! Fits all Beta and Gas Gas 2 strokes (not trials)

  • Brand: G2 Ergonomics
  • ASIN: B000WJC1GA
  • UPC: 754207620751
  • Part No: G2-20-200
G2 Ergonomics Throttle Cam - G2 Ergonomics 60-600 - Jimmy Twister Throttle Tube Bearing
G2 Ergonomics 60-600 - Jimmy Twister Throttle Tube

G2 Ergonomics Throttle Cam

G2 Challenge: Create a bullet-proof throttle tube with smooth action. G2 Solution: The G2 Throttle Tube. The G2 Throttle Tube consists of the ultra-smooth G2 tube with Delrin inserts fitted with a 100 throttle cam that is the same size as stock. The throttle tube shares the unique G2 cam and tube interlock that allows the rider to update to a quicker turn or control cam, sold separately, at any time. G2 Key Points: Machined from 6061 aluminum in the USA! Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel. Included cam is removable and can be replaced with alternate cams (sold separately) to fine tune control. Fits inside the stock throttle housing to stock cables. Slide one of our Domino grips (sold separately) or your grip unto the G2 Stock Throttle Tube. Removable end cap for simple handguard installation. Installs in minutes! Fits: KLR650 (87-07)

  • Brand: G2 Ergonomics
  • ASIN: B0068ESSME
  • Part No: 60-600
G2 Ergonomics Throttle Cam - G2 Ergonomics G2-40-100 - Throttle Cam System
G2 Ergonomics G2-40-100 - Throttle Cam

G2 Ergonomics Throttle Cam

The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle.  This slightly longer pull makes a HUGE difference in rider control as the power is rolled on.  The system comes with a "100CAM" - same as stock, "200CAM" - starts out 10% smaller than stock and "400CAM" - starts out 20% smaller than stock.  The radius of the 200CAM and 400CAM increases or "ramps up" to stock size at  ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation. Fits: CR 250F/450F (02-17)

  • Brand: G2 Ergonomics
  • ASIN: B000WJC1H4
  • Part No: G2-40-100
G2 Ergonomics Throttle Cam - G2 Ergonomics 40-4H-HYK - Tamer Throttle Tube
G2 Ergonomics 40-4H-HYK - Tamer Throttle

G2 Ergonomics Throttle Cam

G2 Challenge: Offer one throttle set-up for best overall performance in all off-road conditions. G2 Solution: The Throttle Tamer. The Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube. By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle. This slightly longer pull makes a HUGE difference in control as the power is rolled on and the rider searches for traction. The radius increases or "ramps up" after ½ throttle to keep overall rotation requires to reach full throttle at or near stock rotation. G2 Key Points: - Machined from 6061 aluminum in the USA! - Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel. - Included cams: A 400 cam that starts out approximately 15% smaller than stock. - Fits inside the stock throttle housing to stock cables. - Removable end cap for simple handguard installation. - Installs in minutes! ...

  • Brand: G2 Ergonomics
  • ASIN: B00AWS0NNY
  • UPC: 754207621185
  • Part No: 40-4H-HYK
G2 Ergonomics Throttle Cam - G2 Ergonomics G2-20-100 - Throttle Cam System
G2 Ergonomics G2-20-100 - Throttle Cam

G2 Ergonomics Throttle Cam

The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle.  This slightly longer pull makes a HUGE difference in rider control as the power is rolled on.  The system comes with a "100CAM" - same as stock, "200CAM" - starts out 10% smaller than stock and "400CAM" - starts out 20% smaller than stock.  The radius of the 200CAM and 400CAM increases or "ramps up" to stock size at  ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation. Fits: KX125/250 (92-08), RM125/250 (95-09), YZ125/250 (96-18)

  • Brand: G2 Ergonomics
  • ASIN: B000GVA2CY
  • Part No: G2-20-100
G2 Ergonomics Throttle Cam - G2 Ergonomics Throttle Tamer Suzuki V-Strom, SV1000 40-4d-136 with Delrin Bushings
G2 Ergonomics Throttle Tamer Suzuki V-Strom, SV1000 40-4d-136 with Delrin

G2 Ergonomics Throttle Cam

The G2 Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube. By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle. This virtually eliminates the jerky "throttle snatch" especially evident in modern fuel injected street bikes. The radius increases or "ramps up" after ½ throttle to keep overall rotation requires to reach full throttle at or near stock rotation. Fits DL1000 V STROM 02-12, DL650 V STROM 04-06, and SV1000S 03-07

  • Color: Silver
  • Brand: G2 Ergonomics
  • ASIN: B015TLRP20
  • UPC: 754207622038
  • Part No: 40-4d-136
G2 Ergonomics Throttle Cam - G2 Ergonomics Throttle Tamer Ducati Monster Scrambler 40-4x-2str with Delrin Bushings
G2 Ergonomics Throttle Tamer Ducati Monster Scrambler 40-4x-2str with Delrin

G2 Ergonomics Throttle Cam

The G2 Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube. By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle. This virtually eliminates the jerky "throttle snatch" especially evident in modern fuel injected street bikes. The radius increases or "ramps up" after ½ throttle to keep overall rotation requires to reach full throttle at or near stock rotation. Fits all Ducati models with single cable throttles from 1999 through 2016 including Monster, Scrambler, 748 (94-02), 916 (1995) Hypermotard 796/1100 (10-12), MH900e (2002), ST2 (98-03), ST3 (04-07), ST4 (00-05)m Superbike 800/848/996/998/999/1000/1098 (00-13)and others.

  • Color: Silver
  • Brand: G2 Ergonomics
  • ASIN: B015D2Z6SA
  • UPC: 754207622366
  • Part No: 40-4x-2str
G2 Ergonomics Throttle Cam - G2 Ergonomics G2-40-200 - Throttle Cam System
G2 Ergonomics G2-40-200 - Throttle Cam

G2 Ergonomics Throttle Cam

The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle.  This slightly longer pull makes a HUGE difference in rider control as the power is rolled on.  The system comes with a "100CAM" - same as stock, "200CAM" - starts out 10% smaller than stock and "400CAM" - starts out 20% smaller than stock.  The radius of the 200CAM and 400CAM increases or "ramps up" to stock size at  ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation. Fits: KX250F (04-14), KX450F (06-08), RMZ250/450 (07-14), TW200 (01-12), XT225/250 (01-12), YZ250F/450F (98-13), WR250/450F (98-14)

  • Brand: G2 Ergonomics
  • ASIN: B000GV92T8
  • Part No: G2-40-200
G2 Ergonomics Throttle Cam - G2 Ergonomics 50-200 - Quick Turn Throttle
G2 Ergonomics 50-200 - Quick Turn

G2 Ergonomics Throttle Cam

G2 Challenge: Increase throttle response and decrease throttle rotation (less turn). G2 Solution: The Quick Turn Throttle Tube. The Quick Turn Throttle Tube consists of the ultra-smooth G2 tube with Delrin inserts fitted with a throttle cam (or "pulley") approximately 10% larger than stock. This translates into about 10 degrees less "twist" necessary to reach wide open. To put this into perspective, a 3% change is noticeable, so a 10% increase will make a significant difference! Increasing the size of the throttle cam will improve your riding in several ways. First, your bike's power characteristics will seem far more responsive - as you turn the throttle, your bike will rev faster than before. Secondly, less overall rotation is required to reach full throttle. This is a huge benefit to riders with limited wrist mobility. In addition, less rotation allows you to more easily maintain a proper riding position with less elbow drop as you crank the throttle.. Fits: kx250f (04-14), kx450f (06-14), klx450x (08-12), rmz250/450 (04-06), yzf250/450 (98-13), wrf250/450 (98-14), tw200 (01-12), xt225/250 (01-12)

  • Brand: G2 Ergonomics
  • ASIN: B000K7OFJK
  • UPC: 754207620881
  • Part No: 50-200
G2 Ergonomics Throttle Cam - G2 Ergonomics G2-40-150 - Throttle Cam System
G2 Ergonomics G2-40-150 - Throttle Cam

G2 Ergonomics Throttle Cam

The Throttle Cam System incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The "pulley", or as we call it, "cam" pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved. The Throttle Cam System has cam options with reduced radius for the first ½ of throttle rotation, which requires a slightly farther turn to achieve the same carburetor or throttle body opening position as a stock throttle.  This slightly longer pull makes a HUGE difference in rider control as the power is rolled on.  The system comes with a "100CAM" - same as stock, "200CAM" - starts out 10% smaller than stock and "400CAM" - starts out 20% smaller than stock.  The radius of the 200CAM and 400CAM increases or "ramps up" to stock size at  ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation. Fits: CRF 150 (07-14)

  • Brand: G2 Ergonomics
  • ASIN: B001AWGHZ4
  • Part No: G2-40-150
G2 Ergonomics Throttle Cam - G2 Ergonomics 17-0531SK-Q Quick-Turn Throttle Rail Grips with Skully End Caps
G2 Ergonomics 17-0531SK-Q Quick-Turn Throttle Rail Grips with Skully End

G2 Ergonomics Throttle Cam

  • Model: Quick-Turn Throttle Rail Grips with Skully End Caps
  • Color: SilverChrome
G2 Ergonomics Throttle Cam - G2 Ergonomics 17-0513-Q Quick-Turn Throttle Rail Grips with Smooth End Caps
G2 Ergonomics 17-0513-Q Quick-Turn Throttle Rail Grips with Smooth End

G2 Ergonomics Throttle Cam

  • Model: Quick-Turn Throttle Rail Grips with Smooth End Caps
  • Color: SilverChrome
G2 Ergonomics Throttle Cam - G2 Ergonomics 17-0531SK-T Quarter-Turn Throttle System - Rail Grips with Skully End Caps
G2 Ergonomics 17-0531SK-T Quarter-Turn Throttle System - Rail Grips with Skully End

G2 Ergonomics Throttle Cam

  • Model: Quarter-Turn Throttle System - Rail Grips with Skully End Ca
G2 Ergonomics Throttle Cam - ODI V2 Lock On & Fusion Snap On Throttle Cam H (H70SCH)
ODI V2 Lock On & Fusion Snap On Throttle Cam H

G2 Ergonomics Throttle Cam

  • Color: Black
G2 Ergonomics Throttle Cam - Johnson/Evinrude/OMC New OEM THROTTLE CAM & SCREW AY 0396740 396740
Johnson/Evinrude/OMC New OEM THROTTLE CAM & SCREW AY 0396740

G2 Ergonomics Throttle Cam

G2 Ergonomics Throttle Cam - G2 Ergonomics 17-0531EG-Q Quick-Turn Throttle Rail Grips with Eagle End Caps
G2 Ergonomics 17-0531EG-Q Quick-Turn Throttle Rail Grips with Eagle End

G2 Ergonomics Throttle Cam

  • Model: Quick-Turn Throttle Rail Grips with Eagle End Caps
  • Color: SilverChrome
G2 Ergonomics Throttle Cam - G2 Ergonomics 17-0522-Q Quick Turn Throttle Grips - Neils Diamond
G2 Ergonomics 17-0522-Q Quick Turn Throttle Grips - Neils

G2 Ergonomics Throttle Cam

  • Model: Quick Turn Throttle Grips - Neils Diamond
  • Color: SilverChrome

Throttle Cam System by G2 Ergonomics

G2 Ergonomics Throttle Cam

Learn about the Throttle Cam System (TCS) from G2 Ergonomics. The system comes with three cams that allow interchangeability based on riding conditions. This is the ultmate system for supercross, motocross, and dirt riders. This system is used by pro riders all around the country!

  • Likes: 35
  • View count: 18471
  • Dislikes: 5
  • Comments:
Tags: g2,ergo,ergonomics,tcs,throttle,cam,system,tube,control,speed,100,200x,300x,stock,interchange,cams,riding,conditions,dirt,riders,motocross,supercross,country

G2 Ergonomics Throttle Cam I6992 Search Results

Looking for more G2 Ergonomics Throttle Cam similar ideas? Try to explore these searches: Mock Neck Pullover Sweater, Bronze Holdbacks, and Cute Cat.

FindShopent.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.